7100系列耐壓/絕緣測試儀|臺灣華儀7151 7152 7160 7162|臺灣華儀代理
特點
體積小 (28寬 × 8.9高 × 30深 cm) 、重量輕 8.4kg
四種測試順序可供選擇:W I W-I I-W (Only 7152 7162)
可與華儀的接地阻抗測試儀7305連結使用
緩升及測試時間可達999.9秒
操作簡單
型號
7151 AC Withstand Voltage Tester |
7152 AC Withstand Voltage / Insulation Resistance Tester |
7160 AC/DC Withstand Voltage Tester |
7162 AC/DC Withstand Voltage / Insulation Resistance Tester |
規格
7100 Series Hipot / Insulation Tester
MODEL | 7151 | 7152 | 7160 | 7162 |
AC WITHSTAND VOLTAGE |
Output Rating | 5KVAC/12mA |
| Range | Resolution | Accuracy |
Output Voltage KVAC | 0-5.00 | 0.01 | ±(2% of setting + 5V) |
Output Frequency | 50Hz/60Hz ±100ppm User Selection |
Output Waveform | Sine Wave THD.<2% (Resistive Load) Crest Factor = 1.3 - 1.5 |
Output Regulation | ± (1% of output + 5V) From no load to full load |
SETTINGS |
Hi-Limit AC Current mA | 0.10 - 12.00 | 0.01 | ±(2% of setting + 2counts) |
Lo-Limit AC Current mA | 0.00 - 12.00 | 0.01 | ±(2% of setting + 2counts) |
Ramp Time second | 0.1 - 999.9 | 0.1 | ±(0.1% + 0.05sec) |
Dwell Time second | 0 0.2 - 999.9 (0=continuous) | 0.1 |
Arc Detection | 0 1 - 9 ranges (0=OFF 9 is the most sensitivity) |
DC WITHSTAND VOLTAGE (71607162 ONLY) |
Output Rating | 6KVDC/5mA |
Output Voltage KVDC | 0 - 6.00 | 0.01 | ±(2% of setting + 5V) |
Output Ripple | <5%(6KV/5mA at Resistive Load) |
SETTINGS |
Hi-Limit DC Current mA | 0.02 - 5.00 | 0.01 | ±(2% of setting + 2counts) |
Lo-Limit DC Current mA | 0.00 - 5.00 | 0.01 | ±(2% of setting + 2counts) |
Ramp Time second | 0.1 - 999.9 | 0.1 | ±(0.1% + 0.05sec) |
Dwell Time second | 0 0.2 - 999.9 (0=continuous) | 0.1 |
Arc Detection | 0 1 - 9 ranges (0=OFF 9 is the most sensitivity) |
Discharge Time | < 200 msec |
INSULATION RESISTANCE (71527162 ONLY) |
Output Rating | 1KVDC/1000MΩ |
Output Voltage KVDC | 0.10 - 1.00 | 0.01 | ±(2% of setting + 3V) |
SETTINGS |
Hi-Limit Resistance MΩ | 0 1 - 1000 (0=OFF) | 1 | ±(3% of setting+2counts)at > 500VDC |
Lo-Limit Resistance MΩ | 1 - 1000 | 1 | ±(7% of setting +2counts)at <500VDC |
Delay Time second | 0 0.5 - 999.9 (0=continuous) | 0.1 | ±(0.1% + 0.05sec) |
MEASUREMENT |
AC/DC Voltage KV | 0 - 6.00 | 0.01 | ± (1.5% of reading ) ≥ 500V ± (1.5% of reading + 1 count) < 500V |
DC Voltage KV (IR only) | 0.10 - 1.00 | 0.01 | ±(1.5% of reading + 3V) |
AC Current mA | 0.10 - 12.00 | 0.01 | ±(2% of reading + 2counts) |
DC Current mA | 0.02 - 5.00 | 0.01 | ±(2% of reading + 2counts) |
Resistance MΩ | 1 - 1000 (Auto Range) | 0.001 0.01 0.1 | ±(3% of reading+2counts)at > 500VDC ±(7% of reading +2counts)at <500VDC *1 |
GENERAL |
Input Voltage AC | 115/230Vac±15% 50/60Hz ± 5% Fuse 3.15A Fast |
PLC Remote Control | Input : Test Reset |
Output : Pass Fail Processing |
Memory | 10 Sets Store/Recall of each Memory 4 Test Mode Selectable (W I W~I(xiàn) I~W Only 7152 7162) |
Display | 16×2 LCD with back light |
Key Lock | To prevent unauthorized alteration of the test Parameters |
Calibration | Build-in software and external calibrated meters |
Environment | 0-40℃ 20-80%RH |
Dimension/Net Weight | 280mm(W)×89mm(H)×300mm(D)/ 8.4Kg |
STANDARD ACCESSORIES |
Power Cord(10A) | ×1 |
Fuses | ×2 (Including a spare contained in the fuse holder) |
Hipot Test Lead 1.5m(1101) | ×1 |
Hipot Return Lead 1.8m(1102) | ×1 |
*1 If the value of V/R is lower than 3.5uA for IR function 7152 and 7162 need to be warmed for one hour |
*product specifications are subject to change without notice. |